I’m having trouble replacing the bearings in my hotpoint washing machine. I’ve followed the instructions in the manual and I’m still having difficulty. I’m not sure what I’m doing wrong. Does anyone have any advice on how to replace the bearings in a hotpoint washing machine? Any help would be greatly appreciated.
I was recently tasked with replacing the bearings in a Hotpoint washing machine. It was a daunting task, but I was determined to get it done. After doing some research, I decided to take it apart and inspect the bearings. I was relieved to find that the bearings were still in good condition and didn’t need to be replaced.
Next, I needed to remove the drum. To do this, I had to unscrew the screws that held the drum in place. This was a bit tricky, but I was eventually able to do it. Once the drum was removed, I was able to check the bearings and make sure they were in good condition.
After that, I had to reassemble the machine. I had to make sure to tighten all the screws and bolts to make sure the machine was securely put together. I also had to make sure that the drum was in the right position and that the bearings were properly lubricated.
Finally