Hello,

Sign up to join our community!

Welcome Back,

Please sign in to your account!

Forgot Password,

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

You must login to ask a question.

Please briefly explain why you feel this question should be reported.

Please briefly explain why you feel this answer should be reported.

Please briefly explain why you feel this user should be reported.

Frigidaire

Share
Followers
613 Answers
619 Questions
  1. The length of time it takes to wash clothes on a Frigidaire front load washing machine depends on the cycle you select. For example, a normal cycle may take up to an hour, while a quick wash cycle may take as little as 15 minutes.

    The length of time it takes to wash clothes on a Frigidaire front load washing machine depends on the cycle you select. For example, a normal cycle may take up to an hour, while a quick wash cycle may take as little as 15 minutes.

    See less
  2. The cubic size of the Frigidaire washing machine model LEQ1442ES1 is 3.5 cubic feet.

    The cubic size of the Frigidaire washing machine model LEQ1442ES1 is 3.5 cubic feet.

    See less
  3. To clean the drain hose on a Frigidaire Affinity washing machine, first unplug the machine and disconnect the drain hose from the back of the washer. Place the hose in a bucket and use a mixture of warm water and a mild detergent to flush out any debris. Once the hose is clean, reconnect it to the bRead more

    To clean the drain hose on a Frigidaire Affinity washing machine, first unplug the machine and disconnect the drain hose from the back of the washer. Place the hose in a bucket and use a mixture of warm water and a mild detergent to flush out any debris. Once the hose is clean, reconnect it to the back of the washer and plug the machine back in.

    See less
  4. To put a Frigidaire washing machine in diagnostics mode, you will need to press and hold the "Start/Pause" and "Delay Start" buttons simultaneously for 3 seconds. The machine will then enter diagnostics mode and the "Start/Pause" light will flash.

    To put a Frigidaire washing machine in diagnostics mode, you will need to press and hold the “Start/Pause” and “Delay Start” buttons simultaneously for 3 seconds. The machine will then enter diagnostics mode and the “Start/Pause” light will flash.

    See less
  5. To reset the F8 error code on a Frigidaire washing machine, press and hold the Start/Pause button for 5 seconds. This should reset the code and allow the machine to resume normal operation.

    To reset the F8 error code on a Frigidaire washing machine, press and hold the Start/Pause button for 5 seconds. This should reset the code and allow the machine to resume normal operation.

    See less
  6. 1. Unplug the washing machine from the power source. 2. Remove the screws from the back panel of the machine and remove the panel. 3. Disconnect the wiring harness from the drive motor. 4. Remove the mounting bolts that secure the motor to the cabinet. 5. Lift the motor out of the cabinet and discarRead more

    1. Unplug the washing machine from the power source.
    2. Remove the screws from the back panel of the machine and remove the panel.
    3. Disconnect the wiring harness from the drive motor.
    4. Remove the mounting bolts that secure the motor to the cabinet.
    5. Lift the motor out of the cabinet and discard.
    6. Install the new motor and secure it with the mounting bolts.
    7. Reconnect the wiring harness to the new motor.
    8. Replace the back panel and secure it with the screws.
    9. Plug the washing machine back into the power source.

    See less
  7. 1. Check the power cord and make sure it is properly plugged into the wall outlet. 2. Make sure the water supply is connected and turned on. 3. Check the water inlet valve and make sure it is not clogged or blocked. 4. Clean the filter and drain pump to remove any debris or lint. 5. Check the door sRead more

    1. Check the power cord and make sure it is properly plugged into the wall outlet.

    2. Make sure the water supply is connected and turned on.

    3. Check the water inlet valve and make sure it is not clogged or blocked.

    4. Clean the filter and drain pump to remove any debris or lint.

    5. Check the door seal and make sure it is properly sealed.

    6. Make sure the drain hose is not kinked or blocked.

    7. Check the water level switch and make sure it is functioning properly.

    8. Check the timer and make sure it is set correctly.

    9. Check the drive belt and make sure it is in good condition.

    10. Check the motor and make sure it is functioning properly.

    See less
  8. To replace the socks on a Frigidaire washing machine, you will need to locate the access panel on the back of the machine. Once you have opened the access panel, you will need to remove the old socks and replace them with new ones. Make sure to secure the new socks firmly before closing the access pRead more

    To replace the socks on a Frigidaire washing machine, you will need to locate the access panel on the back of the machine. Once you have opened the access panel, you will need to remove the old socks and replace them with new ones. Make sure to secure the new socks firmly before closing the access panel.

    See less
  9. If the front door of your Frigidaire Affinity washing machine is dropping, it is likely due to a problem with the door latch. To fix this, you will need to inspect the door latch and make sure it is properly aligned and secured. If the latch is loose or damaged, you may need to replace it. You may aRead more

    If the front door of your Frigidaire Affinity washing machine is dropping, it is likely due to a problem with the door latch. To fix this, you will need to inspect the door latch and make sure it is properly aligned and secured. If the latch is loose or damaged, you may need to replace it. You may also need to adjust the door hinges to ensure the door is properly aligned and secure.

    See less
  10. 1. Start by disconnecting the power to the washing machine. 2. Remove the screws from the back of the washer to access the detergent drawer. 3. Pull the detergent drawer out and remove any debris that may have accumulated. 4. Insert the new detergent drawer into the washer. 5. Secure the drawer withRead more

    1. Start by disconnecting the power to the washing machine.
    2. Remove the screws from the back of the washer to access the detergent drawer.
    3. Pull the detergent drawer out and remove any debris that may have accumulated.
    4. Insert the new detergent drawer into the washer.
    5. Secure the drawer with the screws that were removed earlier.
    6. Reconnect the power to the washing machine.

    See less