I have an Amana washing machine and I’m having trouble removing the water screens. I’ve looked online to find out how to do this, but I’m still not sure. Does anyone have any advice on how to remove the water screens? I’m hoping to get some tips on how to do this quickly and easily. Any help would be much appreciated.
I recently had to figure out how to remove water screens in my Amana washing machine. I had never done this before, so I was a bit nervous. I searched online for instructions and was able to find some helpful tips. I started by unplugging the machine and turning off the water supply. Then I located the screens, which were located inside the hoses connected to the back of the machine. I used a pair of pliers to carefully remove the screens and set them aside. I then used a brush to clean out any debris that had built up inside the hoses. Finally, I replaced the screens and re-attached the hoses. After I plugged the machine back in and turned on the water supply, it was ready to go. I was relieved to have figured out how to remove the water screens and get my washing machine back up and running.